8 FUNCTIONS OF THE CONFIGURATION TOOL
8.2 Starting and Exiting the Configuration Tool
65
8
■Connection target
Setting the I/O assignment to GX Works2 and the configuration tool enables writing of data into the flexible high-speed I/O
control module and the monitor display through the CPU module.
However, do not change the I/O assignment on GX Works2 after the configuration tool is started. If the I/O assignment is
changed on GX Works2 and data writing to the module, the monitor display, or simulation is executed after the configuration
tool has been started, a communication error will occur.
Exit
Select [Project] and [Exit] in the configuration tool.
To Next Page
Loading...
