Mitsubishi Electric MELSEC-L Series - Page 292

290
C114
H
An e-mail that was received has an attachment with an
invalid name.
• Check if the file extension of the attachment is "bin" or
"asc" on the sending side.
• Check that the e-mail is not compressed or encrypted.
• Check the destination of the MSEND instruction.
• Receive an e-mail with an unknown destination and
unknown destination server from the SMTP server.
C115
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C116
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C117
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C118
H
System error (The OS detected an error.)
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply
module, and the CPU module are properly connected.
(2) Check if the operating environment of the Ethernet
module conforms to the general specifications of the
CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the
manual for each module.
If the actions above do not solve the problem, please consult
your local Mitsubishi representative.
C119
H
There is no received mail.
• Read Mail information storage area (address: 2682
H
) of
the buffer memory and read received e-mails remaining
on the server.
Error code Error description Action