Mitsubishi Electric MELSEC-L Series - TCP;IP Communications

70
*1 An E71 is always waiting for an open request from a connected device (communications can be performed during
STOP), regardless of the initial timing setting in the Ethernet operation setting. ( Page 67, Section 7.1.3)
*2 Do not enter 5000 (1388
H
) to 5002 (138A
H
). ( Page 309, Appendix 2)
*3 The range of 1 (1
H
) to 1024 (400
H
) is available only in the E71 with the serial number (first five digits) of "15042" or later.
Destination IP Address Set the IP address of the connected device.
•DEC:
0.0.0.0 to
255.255.255.255
•HEX:
00.00.00.00 to
FF.FF.FF.FF
Destination Port No. Set port numbers for connections of connected devices.
•DEC:
1 to 65535
*3
•HEX:
1
H
to FFFF
H
*3
Item Description Setting range