Chapter 1
19
About this document
1.5 Abbreviations used
External device monitoring
Enhanced function interface
Electro-sensitive protective equipment (e.g. C4000)
Output signal switching device
Revolutions (1 Rev = 360°)
1.6 Symbols and notations used
Recommendations are designed to give you some assistance in your decision-
making process with respect to a certain function or a technical measure.
Note provides special information on a device or a software function.
Instructions for taking action are shown by an arrow. Read carefully and follow the
instructions for action.
ATTENTION!
An “ATTENTION” indicates concrete or potential dangers. It is intended to protect
you from harm and help avoid damage to devices and systems.
Read warnings carefully and follow them!
Otherwise the safety function may be impaired and a dangerous state may occur.
The names of software menus, submenus, options and commands, selection boxes
and windows are highlighted in bold. Example: Click Edit in the File menu.
The term “dangerous state”
The dangerous state (standard term) of the machine is always shown in the
drawings and diagrams of this document as the movement of a machine part. In
practical operation, there may be a number of different dangerous states:
machine movements
electrical conductors
visible or invisible radiation
a combination of several risks and hazards
Keys are shown in uppercase.
Keys to be pressed sequentially are hyphenated with “-”.
Example: “CTRL+ALT+DEL” indicates to press these keys simultaneously. “F12-2”
indicates to press these keys sequentially. The key names are based on the
standard keyboard. Some users may use a keyboard with a different language
layout such as German.
EDM
EFI
ESPE
OSSD
Rev
Recommendation
Note
Action
ATTENTION
Menus and
commands
Key
To Next Page
Loading...
