Chapter 8
115
Flexi Line
8.2.6 Status and diagnostics
The Diagnostics view shows which data have been received, used and forwarded.
The bytes in the process image for the actual station are shown in the Byte overview
area on the left. If you select one of the bytes, the related bits are shown underneath
together with their tag names.
The processing of the selected bits is shown in the Detail overview area on the right:
On the left you can see the input bits that are received from the two neighboring
stations as well as the status of the local inputs.
On the right you can see the output bits that are sent to the two neighboring
stations, as well as the status of the local outputs.
If the Flexi Line system is online, active bits are shown in color and inactive bits in
gray.
In the area on the left you can select the individual bits in the byte currently shown.
The processing of these bits is shown in detail on the right:
Figure 86:
Flexi Line diagnostics
To Next Page
Loading...
