Mitsubishi Electric WS0-CPU0 - Module Status Bits in the Hardware Configuration View

Chapter 5
33
The graphical user interface
5.5.2 Module status bits in the Hardware configuration view
When the MELSEC-WS safety controller is online (i.e. the Setting and Monitoring Tool
is connected to the system), you can display the status bits of each module and their
current values.
 Right click on any module (CPU module, network module or safety I/O module) and
select Edit... in the context menu. If the system is online, the dialog window for the
selected module opens with the additional Diagnostics file card where all available
status bits for the selected module and their values are displayed.
 Click on the Refresh button to update the values of the module status bits.
Figure 9:
CPU status bits in the
Hardware configuration view
Figure 10:
Network module status bits
in the Hardware
configuration view