Chapter 2
21
On safety
2.3 General protective notes and protective
measures
Observe the protective notes and measures!
Please observe the following items in order to ensure proper use of the MELSEC-
WS safety controller.
When mounting, installing and using the MELSEC-WS safety controller, observe
the standards and directives applicable in your country.
The national and international rules and regulations apply to the installation and use
as well as commissioning and periodic technical inspection of the MELSEC-WS
safety controller, in particular:
– Machinery Directive 2006/42/EC,
– EMC Directive 2004/108/EC,
– Provision and Use of Work Equipment Directive 2009/104/EC and the
supplementary Directive 35/63/EC,
– Low-Voltage Directive 2006/95/EC,
– Work safety regulations and safety rules.
Manufacturers and owners of the machine on which a MELSEC-WS safety
controller is used are responsible for obtaining and observing all applicable safety
regulations and rules.
Note
To Next Page
Loading...
