Mitsubishi Electric WS0-CPU0 - Version, Compatibility and Features

Chapter 3
22
Version, compatibility and features
3 Version, compatibility and features
For the MELSEC-WS series several firmware versions and function packages exist
that allow different functions. This chapter gives an overview which firmware version,
which function package and/or which version of the Setting and Monitoring Tool is
required to use a certain function or device.
Minimum required version
Feature WS0-CPU
WS0-XTIO/
WS0-XTDI
Setting and
Monitoring Tool
Logic offline simulation –
*1
– V1.2.0
Logic import/export – – V1.3.0
Online edit – – V1.3.0
Automatic wiring diagrams – – V1.3.0
Central tag name editor – – V1.3.0
Flexi Link (only with WS0-
CPU1/WS0-CPU3)
V2.01
(Revision 2.xx)
– V1.3.0
Flexi Line (only with WS0-CPU3)
V3.02
(Revision 3.xx)
– V1.7.0
Function block documentation
within the Setting and Monitoring
Tool
– – V1.3.0
Input/output relation matrix – – V1.3.0
Invertable inputs for the AND,
OR, RS Flip-Flop and Routing
N:N function blocks
V2.01
(Revision 2.xx)
– V1.3.0
Ramp down detection function
block
V1.11
(Revision 1.xx)
– V1.3.0
Adjustable on-delay timer and
adjustable off-delay timer
function blocks
V2.01
(Revision 2.xx)
– V1.3.0
Fast Shut Off with Bypass
function block (only with WS0-
XTI0)
V2.01
(Revision 2.xx)
V2.00
(Revision 2.xx)
V1.7.0
Deactivation of test pulses on
Q1–Q4 on the WS0-XTIO
possible
–
V2.00
(Revision 2.xx)
V1.3.0
Verification without identical
hardware possible
V2.01
(Revision 2.xx)
– V1.3.0
Status input data and Status
output data in logic
V2.01
(Revision 2.xx)
V2.00
(Revision 2.xx)
V1.3.0
Data recorder
V2.01
(Revision 2.xx)
– V1.7.0
Extended cross-circuit detection
time for switching loads with
high capacitance
–
V3.10
(Revision 3.xx)
V1.7.0
Adjustable filter time for ON-OFF
filter and OFF-ON filter on the
inputs I1 to I8 of the WS0-
XTIO/WS0-XTDI
–
V3.10
(Revision 3.xx)
V1.7.0
Table 2:
Required firmware and
software versions