Chapter 9
260
Logic programming – Function blocks
The content of the new grouped function block is stored on a new page. In the
example, the name of the new grouped function block is Machine 1. The worksheet for
the grouped function block is displayed orange.
The name and the icon associated with a grouped function block can be edited here
by clicking on the function block’s icon in the FB Group Info view.
By clicking on the associated tab (here: Machine 1), you can edit the grouped function
block.
How to add inputs and outputs to a grouped function block:
Click on the tab for the grouped function block.
Switch to the FB Group Info view on the left side of the screen.
Drag and drop inputs or outputs onto the function block worksheet and attach them
within the logic as needed. (Automatic wiring is not supported.)
Double click on an input or output to edit its tag name.
Figure 246:
New logic editor page for the
new grouped function block
Note
Figure 247:
Adding inputs and outputs to
a grouped function block
To Next Page
Loading...
