Moeller DV6-340 Series - Page 189

Appendix
01/02 AWB8230-1415GB
186
Inputs
Frequency setting Keypad Setting through keys or potentiometer
External
signals
• 0 to 10 VH, input impedance 10 kO;
•–10 V to +10 V H, input impedance 10 kO;
• 4 to 20 mA, load impedance 250 O
• Potentiometer f 1kO, recommended 4.7 kO
Clockwise/anticlock-
wise operation (start/
stop)
Keypad
ON key (for Start) and OFF key (for Stop); default setting = clockwise operation
External
signals
• Digital input FW for clockwise operation (FWD)
• Digital input programmable as REV for anticlockwise operation
Digital control inputs programmable as
• REV: Start/stop anticlockwise operation
• FF1 to FF4: Fixed frequency selection
• JOG: Jog mode
• DB: DC braking active
• SET: Second parameter set active
• 2CH: Second time ramp
• FRS: Free run stop
• EXT: External fault message
• USP: Unattended start protection
• CS: Heavy mains starting
• SFT: Software protection
• AT: Use setpoint value 4 to 20 mA
• SET3: Third parameter set active
• RST: Reset
• STA: Pulse start (3-wire)
• STP: Pulse stop (3-wire)
• F/R: Direction (3-wire)
• PID: PID control active
• PIDC: Reset integral component of PID control
• CAS: Tacho-generator with vector control
• UP: Remote access, acceleration
• DWN: Remote access, deceleration
• UDC: Reset frequency with remote control
• OPE: Setpoint value through operator panel
• SF1 to SF7: Bitwise fixed frequency selection
• OLR: Change over current limit
• TL: Torque limitation active (only with vector control)
• TRQ1: Torque limitation 1 active (clockwise, in drive mode)
• TRQ2: Torque limitation 2 active (anticlockwise, regenerative)
• PPI: P or PI control (only with vector control)
• BOK: Brake enable confirmation
• ORT: Direction of rotation (only with optional DE6-IOM-ENC module)
• LAC: Ramp function Off
• PCLR: Delete positioning deviation (only with optional DE6-IOM-ENC module)
• STAT: Setpoint definition through module (only with optional DE6-... module)
• NO: No function
DV6-340-...
075 1K5 2K2 4K0 5K5 7K5 11K 15K 18K5
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616