Moeller DV6-340 Series - Installation; Installing the DV6; Mounting position

01/02 AWB8230-1415GB
19
3 Installation
The DV6 frequency inverters should be installed in a control panel
or in a metal enclosure (e.g. IP54).
Installing the DV6
The DV6 frequency inverters must be mounted vertically on a non-
flammable background.
Mounting position
Weights and dimensions of the DV6 are listed in the appendix in
Section “Weights and dimensions“, Page 193.
h
During installation or assembly operations on the
frequency inverter, all ventilation slots and openings
should be covered to ensure that no foreign bodies can
enter the device.
Figure 6: Mounting position
F 30˚
F 30˚
F 30˚
F 30˚
Figure 7: Installation dimensions
f 100f 100
f 50
f 50
f 100f 100
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616