Moeller DV6-340 Series - Standard form for user defined parameter settings

01/02 AWB8230-1415GB
Standard form for user defined
parameter settings
199
Standard form for user defined parameter settings
The DV6 series frequency inverters have programmable parame-
ters. In the free Setpoint columns below, you can list the changes
you have made from the default settings.
PNU Function Units Default Page Setpoint
A001 Frequency setpoint input through
• 00: Potentiometer
• 01: Analog inputs O, O2 or OI
• 02: PNU F001 or A020
• 03: RS 485 serial interface
• 04: Optional module in slot 1
• 05: Optional module in slot 2
– 01 123
A002 Start signal definition through
• 01: Input FWD/REV
• 02: ON key
• 03: RS 485 serial interface
• 04: Optional module in slot 1
• 05: Optional module in slot 2
– 01 124
A003 Base frequency [Hz] 50 125
A203 Base frequency (second parameter set) [Hz] 50 125
A303 Base frequency (third parameter set) [Hz] 50 125
A004 Maximum end frequency [Hz] 50 125
A204 Final frequency (second parameter set) [Hz] 50 125
A304 End frequency (third parameter set) [Hz] 50 125
A005 AT selection
• 00: AT input switches between analog input O and
OI
• 01: AT input switches between analog input O and
O2
– 00 61
A006 O2 selection
• 00: O2 signal only
• 01: Sum of signals at O2 and O/OI without direction
reversal
• 02: Sum of signals at O2 and O/OI with direction
reversal
– 00 61
A011 Frequency at minimum setpoint value (terminal O-L) [Hz] 0.00 63
A012 Frequency at maximum setpoint value (terminal O-L) [Hz] 0.00 63
A013 Minimum setpoint value (terminal O-L) [%] 0 63
A014 Maximum setpoint value (terminal O-L) [%] 100 63
A015 Starting frequency (terminal O-L)
• 00: Apply PNU A011 to motor
• 01: Apply 0 Hz to motor
– 01 63
A016 Analog input filter time constant – 863
A019 Fixed frequency selection
• 00: Binary selection through digital inputs FF1 to FF4
• 01: Bitwise selection through digital inputs SF1 to
SF7
– 00 70
A020 Frequency setpoint definition (PNU A001 must be 02) [Hz] 0.00 70
A220 Frequency setpoint definition (PNU A001 must be 02)
(second parameter set)
[Hz] 0.00 70
A320 Frequency setpoint definition (PNU A001 must be 02)
(third parameter set)
[Hz] 0.00 70
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616