Installation
01/02 AWB8230-1415GB
26
Electrical connection
This section describes how to connect the motor and the supply
voltage to the power terminals, and the signal cables to the
control terminals and the signalling relay.
The following illustration shows an overview of the connections.
Warning!
Carry out the wiring work only after the frequency inverter
has been correctly mounted and secured. Otherwise,
there is a danger of electrical shock or injury.
Warning!
Carry out wiring work only under zero voltage conditions.
Warning!
Use only cables, residual-current circuit breakers and
contactors with a suitable rating. Otherwise there is a
danger of fire.
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616
To Next Page
Loading...
