Moeller DV6-340 Series - Connecting the supply voltage; Connecting external supply voltage for the control electronics

Installation
01/02 AWB8230-1415GB
32
Table 5: Tightening torques and conductor cross-sections for the power terminals
Connecting the supply voltage
X Connect the supply voltage to the power terminals L1, L2, L3
and PE:
Connecting external supply voltage for the control
electronics
If you also want to program the DV6 frequency inverter with the
power supply switched off, connect an external power supply (L1
and L3) to terminals R0 and T0. Tis is done as follows:
L1, L2, L3
L+, DC+, DC–, BR
U, V, W, PE
DV6-340- mm
2
AWG mm O Nm Nm
075 1.5 20 < 13 M4 4.5 1.5 1 –
1K5
2.5 18
2K2 16
4K0
14
5K5
M5 5.5 2.5
7K5
4 10 < 17
11K
6 8 M6 6.5 4.9
15K 10 6
18K5
16 6 < 18
22K
4
30K
25 3 < 23
37K 35 1
45K
M8 8.5 – – 8.8
55K
2 x 35 1/0
75K
2 x 1 (75 °C) < 29
90K
2 x 50 M10 10.5 13.7
110K
2 x 70 2 x 1/0 < 40
132K 2 x 2/0
w
w
o
Figure 21: Cable connection to the power terminals
PES
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616