Moeller DV6-340 Series - Page 36

01/02 AWB8230-1415GB
Electrical connection
33
X Remove the screws on terminals R0 and T0 and remove
connector J51.
X Remove the ferrite rings from both cables.
X Push the ferrite rings onto both of the external supply voltage
cables (L1 and L3).
X Screw on the cables of the external voltage supply to the termi-
nals R0 and T0.
R0, T0
mm
2
AWG mm Nm
DV6-340-... 1.5 to 2.5 16 to 14 8 to 10 9 M4 1.2 to 1.38 1
w
Figure 22: Remove the connection of J51 to R0 and T0
Figure 23: Remove the ferrite rings
R0
T0
J51
Figure 24: Push on the ferrite rings
Figure 25: Connecting the external supply voltage
R0
T0
J51
For Moeller Electric Sales and Support call KMparts.com (866) 595-9616