Setting the Non-Interference or Privacy
Feature
This feature ensures improved private communications by
configuring an appropriate PROFILE ID number.
IMPORTANT:
By default, the PROFILE ID number is “0000”.
Ensure that all your radios are configured with the
same PROFILE ID number and is easy to
remember.
The Profile ID feature is enabled through Customer
Programming Software (CPS) configuration.
1 Press Menu/OK → Advanced → PROFILE ID.
2 Enter a four-digit radio PROFILE ID number.
Talk Range
Talk range is the distance or the communication range of
radios. Key considerations that affect range are: signal
type, antenna, and obstructions. You can communicate
with a radio or a group of radios with the same
configuration.
Table 12: Talk Range
Model Steel or Con-
crete Industrial
Buildings
Multi-Level
Buildings
ISM 900 MHz Up to 350,000
ft²
Up to 30 floors
Programmable Button Options
The Programmable button comes pre-programmed with
the Private Reply feature.
By using Customer Programming Software (CPS) or the
Advanced Settings of your radio, you can also configure
the Programmable button to allow other call features, such
as Page All Available, Call All Available, Direct Call, and
Mute. You can also configure the button to disable these
options.
For more details on how to configure the Programmable
Button, refer to Configuring the Programmable Button on
page 44 or Customer Programming Software on page
57.
English
29
To Next Page
Loading...
Need help?
General
