Advanced Settings
The Advanced settings allow you to configure special
settings in your radio without the need of programming
cables or additional software.
PowerSave Mode
PowerSave Mode reduces radio power consumption.
PowerSave Mode can be configured in Customer
Programming Software (CPS) or radio Menu. It disables
the settings of the backlight and the vibration of the radio.
Enabling PowerSave Mode
1 Press the Menu/OK → Advanced → PowerSave.
2 Select Power Save Mode by pressing the Menu/OK
button.
A tick indicates that PowerSave Mode is enabled.
Changing Profile ID Number
The Profile ID number improves the privacy of
communication. The Profile ID feature is enabled through
Customer Programming Software (CPS) configuration.
The following table refers to the backward compatibility
naming with legacy DTR. Hopset in the new DTR is
Channel in Legacy DTR. The last digit of Profile ID is tied to
Hopset number.
The allowable Profile ID number is within 0000-9999.
Changes in Profile ID number affects the hopset number.
Profile ID number setting is a sequence loop back of a
number of available hopset.
Table 13: Backward Compatibility Naming with Legacy
DTR
Hopset Profile ID Num-
ber
Channel (Lega-
cy DTR)
1 xxx0, xxx1 1
2 xxx2 2
3 xxx3 3
4 xxx4 4
English
43
To Next Page
Loading...
Need help?
General
