Direct Call
You can call a pre-programmed user privately. The Direct
Call feature is configurable using the Customer
Programming Software (CPS).
You have the option to program the Direct Call feature into
the Programmable button, or assign to any radio channel.
NOTICE:
To configure Direct Call feature for the first time in
your radio, download the Customer Programming
Software (CPS) for free at http://
www.motorolasolutions.com. Read and upload the
radio IDs (identified as "privates" in CPS) in CPS.
For more information, refer to Customer
Programming Software Basic Menu Instructions on
page 57
Making Direct Call
1 Press the Programmable button.
The display shows Direct Call Queue message
and that you are in queue.
2 To call, press the PTT button.
The distinctive Private Talk Permit Tone (TPT) is
heard.
3 Wait for the Talk Permit Tone to end and speak.
Call All Available
You can perform group call to all users available on
different channels, and users who are not in an on-going
radio conversation. The Call All Available feature does not
interrupt ongoing communications.
You have the option to program the Call All Available
feature into Programmable button, or assign to a channel
using the Customer Programming Software (CPS).
The Call All Available feature allows a communication with
all available radio users at once in a temporary “super
channel" group, without having to change through each
channel individually.
When a caller initiate the Call All Available transmission,
the Programmable button is disabled in all radios involved.
The Private Reply feature or Direct Call feature is disabled
during this period.
English
31
To Next Page
Loading...
Need help?
General
