Hopset Profile ID Num-
ber
Channel (Lega-
cy DTR)
5 xxx5 5
6 xxx6 6
7 xxx7 7
8 xxx8 8
9 xxx9 9
10 xx10 10
Configuring the Programmable
Button
Programmable button allows you to assign a feature onto it
using Customer Programming Software (CPS) or radio
Menu.
1 Press the Menu/OK → Advanced →
Programmable button.
2 To scroll through a list of feature to set for the
Programmable button, press the Up/Down button.
3 Press the Menu/OK button.
A tick indicates the current selected feature for the
Programmable button.
Selecting Home Channel
The purpose of the Home Channel feature is to return the
radio to a predefined channel (home channel) after a
specified idle time in the homescreen when radio is not on
the Home Channel.
1 Press the Menu/OK → Advanced → Home
Channel.
2 To scroll through a list of Home Channel, press the
Up/Down button.
3 Select Home Channel by pressing the Menu/OK
button.
A tick indicates the current selected Home Channel.
English
44
To Next Page
Loading...
