6.24.4.1
Searching and Pairing the Bluetooth Device
Prerequisites:Ensure the Bluetooth on your device is turned on and is set to Discoverable in order to
enable your radio to detect your device in Bluetooth.
When and where to use:Bluetooth Search in Bluetooth Standard Pairing method is used to scan for
other Bluetooth devices nearby. It is set to turn off by default.
Procedure:
1 Perform one of the following actions:
• Press the preprogrammed Bluetooth Search button.
•
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen. or to Search Devices and press the Menu Select button directly below On.
If successful, the display shows followed by the names of Bluetooth devices found, if any. When
the search timer expires, Available Dev screen shows a list of Bluetooth devices found. To stop
the search before the search timer expires, press the preprogrammed Bluetooth Search button
or the Menu Select button below Stop.
If the feature fails to initiate, the radio sounds a short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button below Back to return to Bluetooth feature
screen, or press
or the Menu Select button below Exit to return to Home screen.
2
or to the device name and press the Menu Select button directly below Sel to connect to
the device.
The radio starts pairing to the device.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
Postrequisites:To continue with Bluetooth pairing, see Pairing with Low Frequency-Motorola
Proximity Pairing (LF-MPP) Feature on page 102.
6.24.4.2
Turning On Bluetooth Visibility
When and where to use:Turning Bluetooth visibility on enables other Bluetooth devices to search for
your radio. The visibility of the Bluetooth is set to turn off by default.
Do one of the following to turn on Bluetooth visibility. You can use the options interchangeably
depending on your preference and the programmed functions.
Procedure:
• Turn on Bluetooth visibility using the radio menu BT:
a. or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
b.
or to Visibility and press the Menu Select button directly below On.
The status changes to Visible to all. Visibility mode is enabled.
When the timer expires, the status changes to Visibility failed. Repeat the procedure
to turn on Bluetooth visibility.
MN006147A01-AE
Chapter 6: Advanced Features
104
To Next Page
Loading...
Need help?
General
