• Turn on Bluetooth visibility using the preprogrammed button.
a. Press the preprogrammed button to enable the Bluetooth visibility feature.
You hear a short, medium-pitched tone. The display shows momentary Visible to all.
Visibility mode is enabled.
When the timer expires, the display shows momentary Visibility failed. Repeat the
procedure to turn on Bluetooth visibility.
NOTE: Press the preprogrammed button to toggle the Bluetooth visibility on or off.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
6.24.4.3
Receiving Pairing Request from other Devices
When and where to use:When your radio receives a pairing request from other device, the display
shows <Device Friendly Name>pair request.
Procedure:
Press the Menu Select button below Ok to accept or Cncl to refuse pairing request.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
6.24.4.4
Turning Off Bluetooth Visibility
Prerequisites:Ensure that Bluetooth Visibility is turned on.
When and where to use:The following methods are options on how to turn off Bluetooth visibility. The
result of all the methods is the same. You can use the options interchangeably depending on your
preference and the programmed functions.
Procedure:
• Turn off Bluetooth visibility using the radio menu BT:
a.
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
b.
or to Visibility and press the Menu Select button directly below Off.
The display shows Visibility Off.
When the timer expires, the status changes to Visibility off failed. Repeat this step
to turn off Bluetooth visibility.
c. To return to the Home screen, press the Menu Select button directly below Exit.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
MN006147A01-AE
Chapter 6: Advanced Features
105
To Next Page
Loading...
Need help?
General
