2 or to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to scroll through the list.
• or to select a waypoint to view the location information in full.
4 Press the Menu Select button directly below Optn.
5 To view the longitude, time and date of the selected waypoint,
or to View and press the
Menu Select button directly below Sel.
6 To return to the previous screen, press the Menu Select button directly below Back, or to return
to the Home screen, press
or the PTT button.
6.20.9
Editing the Alias of a Waypoint
Prerequisites:Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3 or to the required saved waypoint, and press the Menu Select button directly below Optn.
4
or to Edit name and press the Menu Select button directly below Sel .
A blinking cursor appears in the Edit Name screen.
5 Use the keypad to edit the alias.
6 Perform one of the following actions:
• Press the Menu Select button directly below OK once you are done.
• Press the Menu Select button directly below Cncl to return to the Waypoints main screen.
7 The display shows <Waypoint name> Updated and the radio returns to the Waypoints main
screen.
8 Perform one of the following actions:
• Press the Menu Select button directly below Back to return to the previous screen.
• Press
or the PTT button to return to the Home screen.
6.20.10
Editing the Coordinates of a Waypoint
When and where to use:
NOTE: You can only edit preprogrammed coordinates of Home and Destination.
Ensure that your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
MN006147A01-AE
Chapter 6: Advanced Features
92
To Next Page
Loading...
Need help?
General
