• WACN ID (ASTRO 25 Trunking IDs only)
• System ID
NOTE: Your radio must be preprogrammed to allow you to add, edit, or delete the contact
entries.
Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs.
NOTE: Your radio is preprogrammed with a few contacts per Call Lists. Check with your dealer
or system administrator for more information.
6.5.1
Making a Private Call from Contacts
Prerequisites:Your radio must be preprogrammed to allow you to use this feature.
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts.
The entries are alphabetically sorted.
2 or to the required subscriber alias.
3 Press the Menu Select button directly below Optn and proceed to the next step.
4 or to Call and press the Menu Select button directly below Sel.
5 or to select the call type.
6 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8 Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
6.5.2
Adding a New Contact Entry
Procedure:
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to [New Contact] and press the Menu Select button directly below Sel .
The display shows Name.
3 Press the Menu Select button directly below Edit.
4 Use the keypad to enter the name and press the Menu Select button directly below OK once
you have entered the name.
To cancel this operation, press the Menu Select button directly below Cncl to return to the
previous screen.
MN006147A01-AE
Chapter 6: Advanced Features
52
To Next Page
Loading...
Need help?
General
