Procedure:
1 Press the Menu Select button directly below Optn .
2 or to No Req Reply and press the Menu Select button directly below Sel to remove the
priority status from the message.
The display shows the normal message icon on the label bar.
6.15.4.5
Appending a Priority Status and a Reply Request to a Text Message
Prerequisites:Ensure that an outgoing message is composed to allow you to perform this procedure.
See Composing and Sending a New Text Message on page 73 for more information.
Procedure:
1 Press the Menu Select button directly below Optn .
2
or to Mark Important and press the Menu Select button directly below Sel to indicate
that the message is important.
3
or to Req Reply and press the Menu Select button directly below Sel to request for a
reply.
The priority status and request reply icons appear beside the normal message icon on the label bar.
6.15.4.6
Removing a Priority Status and a Reply Request from a Text Message
Prerequisites:Ensure that an outgoing message is composed to allow you to perform this procedure.
See Composing and Sending a New Text Message on page 73 for more information.
Procedure:
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu Select button directly below Sel to remove
the priority status icon.
3
or to No Req Reply and press the Menu Select button directly below Sel to remove the
reply status icon.
The display shows the normal message icon on the label bar.
6.15.4.7
Receiving a Text Message
When and where to use:
NOTE: When you receive a message that is flagged with the Request Reply icon, you must
manually respond to the sender that you have received the message. The system does not
automatically send a notification to acknowledge that the message was received.
Procedure:
Do one of the following to receive a text message. You can use the options interchangeably
depending on your preference and the programmed functions.
• Receiving a text message using the Data Feature button or the TMS Feature button:
When you receive a message, press and hold the preprogrammed Data Feature button or
the TMS Feature button to access the Inbox.
• Receiving a text message using the radio menu:
MN006147A01-AE
Chapter 6: Advanced Features
76
To Next Page
Loading...
Need help?
General
