2 Press the Menu Select button directly below Loc.
The display shows Previous loc <Latitude>.
3
or to check the time and date of the last successful location fix.
4 Press the Menu Select button directly below Optn .
5 or to Turn Off GPS (if preprogrammed).
6 Press the Menu Select button directly below Sel to turn off the GPS.
The display shows Location off.
7 To return to the Home screen, press , the PTT button, or the Menu Select button directly
below Exit.
6.20.7
Saving a Waypoint
Prerequisites:Ensure that your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2 Perform one of the following actions:
•
or to Save as Waypt and press the Menu Select button directly below Sel.
• or to Save as Home and press the Menu Select button directly below Sel and
proceed to step 5.
• or to Save as Dest. and press the Menu Select button directly below Sel and
proceed to step 5.
A blinking cursor appears on the screen.
3 Use the keypad to edit the auto-generated waypoint, if required, or press the Menu Select
button directly below Cncl to return to the Location main screen.
4 Press the Menu Select button directly below OK once you are done.
One of the following scenarios occur:
• The display shows Saved as <Waypoint name>.
• The display shows Saved as Home.
• The display shows Saved as Dest..
5 To return to the Home screen, press
, the PTT button, the preprogrammed GPS button, or
the Menu Select button directly below Exit.
6.20.8
Viewing a Saved Waypoint
Prerequisites:Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
MN006147A01-AE
Chapter 6: Advanced Features
91