Motorola APX E5 User Manual

6.31.16.4
Changing a Channel Parameter
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3
or to scroll through the various information.
4 Press EDIT to edit the channel parameter.
5 Change the parameter value.
6 Press OK to accept the parameter change and return to view mode.
7 Perform one of the following actions and proceed to the next step:
• or to select other channel parameters.
• Press BACK to access a different channel and make any necessary programming changes.
8 Press BACK to return to Zone List Selector.
9 Press BACK to return to FPP main menu.
10 Press to return to the Home screen.
6.31.16.5
Editing Parameters
When and where to use:Use the keypad to enter the numeric digits. Each key can generate different
characters of the alphabet through multiple presses of the same key. For all parameters except Chan
Name, Zone Name, Top Chan Name and Top Zone Name the
or buttons increment or decrement
the selected value by scrolling through the valid entries.
Procedure:
1 Perform the following actions based on the type of the parameter:
Table 8: Parameter Editing Keys
Parameter Editing Keys Value
Tx Perform one of the following:
• or to increment entry and to move cursor.
• Use keypad to directly enter the desired value.
Rx
Tx PL Perform one of the following:
• or to increment entry and to move cursor.
• Use keypad to directly enter the desired value.
DEL to delete the parameter value of PL entered.
In addition, for Tx DPL and Rx DPL, the INVT softkey switches INVERT on
and off.
Rx PL
Tx DPL
Rx DPL
Tx NAC
or to increment or decrement entry and to move cursor within parameter
value.
Rx NAC
MN006147A01-AE
Chapter 6: Advanced Features
130

Motorola APX E5 Specifications

General

Brand	Motorola
Model	APX E5
Category	Two-Way Radio
Language	English