EasyManuals Logo

Motorola APX E5 User Manual

Motorola APX E5
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
6.31.15.2
Deactivating the Action Consolidation Activities
When and where to use:When the radio is running activities of the Action Consolidation, the following
interruptions shall end the Action Consolidation activities.
Procedure:
Press .
The display shows Action Consolidation Canceled. The radio ends the transmission and
reverts to Home mode.
Press PTT button to transmit.
The display shows Action Consolidation Canceled. The radio ends the transmission and
reverts to Home mode.
NOTE: The Siren and Lightbar activities run by Action Consolidation are not deactivated,
but continue until they are completely or manually disabled.
Press Emergency button or received an Emergency message.
The display shows Action Consolidation Canceled. The radio ends the transmission and
reverts to Home mode and launch emergency.
6.31.16
Front Panel Programming
You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance
the use of your radio.
The radio can be programmed in two ways:
Front Panel Programming (FPP) using the front panel controls of the radio.
Customer Programming Software (CPS), with the radio connected to a PC computer.
There are two methods to program a channel within a zone. Either:
Select the zone and channel through the radio interface, and then initiate the FPP feature. Or,
initiate the FPP feature, and then select the zone and channel.
NOTE: When any of the Rx parameters such as Rx frequency, Rx PL, Rx DPL, and Rx NAC
is changed, FPP automatically copies these Rx parameter values to the equivalent Direct
operation (also known as Talkaround operation) parameters. If you use FPP to change the Rx
frequency to be the same as the Tx frequency and subsequently use the CPS to read then
write to the radio, Direct/Talkaround mode will operate differently from when a receive channel
parameter value is changed through FPP (as described in the above note). Refer to the CPS
help files for a description of Direct/ Talkaround Mode operation, in respect to a CPS write to
the radio.
6.31.16.1
Initiating the FPP Feature
Prerequisites:Before using this feature, you should:
Familiarize yourself with the your radio.
Remove the universal connector seal or any other accessories if it is attached to the radio.
MN006147A01-AE
Chapter 6: Advanced Features
128

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola APX E5 and is the answer not in the manual?

Motorola APX E5 Specifications

General IconGeneral
BrandMotorola
ModelAPX E5
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals