6.14.1
Selecting or Changing the ARS Mode
When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the radio menu:
a. Press and hold
or to Chan .
b. Press the Menu Select button directly below Chan .
The display shows the current channel name.
c.
or or rotate the Mode Knob to the desired channel.
d. Press Sel to confirm the displayed channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
• Selecting the ARS mode using the Mode Knob :
a. After the zone you want is displayed, toggle until the display shows the required channel.
The display shows that the current zone is not blinking, and the channel is blinking.
b. or or rotate the Mode Knob to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
c.
Press to confirm the displayed zone and channel.
• Selecting the ARS mode using the Mode Knob:
a. Rotate the Mode Knob to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
b. Press Sel to confirm the displayed zone and channel.
MN006147A01-AE
Chapter 6: Advanced Features
70