5.6.5
Adding Bluetooth Devices
Audio devices, such as headsets or PTT pods are added (and connected) by selecting Add Device
from the Bluetooth
menu.
Sensor devices, such as barcode scanners or firearms devices, as well as devices used for radio
control must be added to the radio codeplug by the service provider before they can be used. Once the
radio is configured to use specific sensor devices, they can then be added in the same manner as
audio devices, i.e. by selecting Add Device from the Bluetooth menu.
5.6.6
Devices
This menu item lists all devices paired with your radio and allows you to perform the following
operations:
• Connect a device
• View and change device details
• Disconnect a device
• Delete a device
5.6.6.1
Bluetooth Smart Proximity Pairing
With the use of Proximity Pairing, you can instantly connect your radio with Bluetooth Low Energy
(BTLE) devices.
BTLE devices are various types of sensors the radio can be paired with via Bluetooth, for example gas
or heart rate sensors.
To pair the radio with a sensor, move the radio close to a sensor and press and hold the One Touch
Button. A tone indicates successful pairing and connection. After the connection, the radio collects
information from the sensor.
5.6.6.2
Pairing Bluetooth Devices with Your Radio
Pairing is a process that creates a link between two Bluetooth-enabled devices. Once paired, devices
remember each other and every subsequent connection between them is authenticated automatically.
When and where to use: To scan for available Bluetooth-enabled devices and to connect with them.
Procedure:
1 From the home screen, press the MENU key.
2 Select Bluetooth → Add Device. Ensure that the device you want to connect with is in pairing
mode.
The radio lists available devices that can be paired with your radio.
3 Highlight the required device and select Connect.
4 If needed, enter a PIN code or a passkey.
NOTICE: If you enter an incorrect PIN code and the subsequent paring attempts take too
long or result in an error message, power the Bluetooth device off and on. The radio
accepts 3 logging attempts.
MN002041A01–AA
Chapter 5: Main Menu
Send Feedback 101
To Next Page
Loading...
