3.5.16
Exiting Emergency Operations
Prerequisites: Make sure that your radio is engaged in Emergency Operations.
Procedure:
1 If your radio screen displays Emergency Mic On, press End.
2 Press and hold Exit.
NOTICE: If an Emergency Operation was triggered by Emergency number (not by
EMERGENCY button), you can press the END key to exit the Emergency Operation.
3 If your radio displays Do you want to exit?, press Yes to exit.
Your radio exits Emergency Operations.
3.6
Repeater Mode
NOTICE: This is a selling feature.
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 7: Repeater Mode Operation
A DMO repeater is used to extend the DMO range by retransmitting received information from one
radio to another. It retransmits group calls, private calls and data on a given frequency. In the diagram
above the radio in the middle is a repeater.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize
on a given frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
The Repeater Mode is activated by selecting
MENU → Networks → Repeater Mode.
3.6.1
Setting Monitor Option
Procedure:
1 From the home screen, press Optns.
MN002041A01–AA
Chapter
3: Modes
74 Send Feedback
To Next Page
Loading...
