EasyManua.ls Logo

Motorola MTP8000Ex Series - Setting Automatic Keylock Delay; Setting Keylock on Startup; Air Encryption; Viewing the Air Encryption State

Motorola MTP8000Ex Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notification and Instruction — Press Menu * to lock/unlock keypadPress Menu + Left to lock/
unlock keypad is displayed.
5.8.2.2
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the MENU key.
2 Select SecurityKeylock SetupDelay.
3 Use up and down
NAVIGATION keys to change the minutes and press Done.
5.8.2.3
Setting Keylock on Startup
Procedure:
1 From the home screen, press the MENU key.
2 Select SecurityKeylock SetupStart Locked.
3 Select On/Off.
5.8.3
Air Encryption
NOTICE: This is a selling feature.
Air Encryption is a feature that enables encryption of entire communication between the radio and
infrastructure, which results in increased security of calls, messages, and data.
If configured by your service provider, the radio plays a sound and displays Call & Data Not
Encrypted when encryption is on and you receive a clear call (unencrypted). This feature provides
service confidentiality between you and the system.
In the TMO Mode, when Air Encryption is enabled on you radio but cannot be supported due to an
infrastructure failure, the following icon appears on the display: .When encryption is not available in
the DMO Mode, the radio displays: .
This menu item allows you only to view air encryption state.
5.8.3.1
Viewing the Air Encryption State
Procedure:
1 From the home screen, press the MENU key.
2 Select SecurityAirEncrypt.
3 Your radio displays:
a
Air Encryption Is Off.
b Air Encryption Is On.
MN002041A01–AA
Chapter 5: Main Menu
108 Send Feedback

Table of Contents

Related product manuals