NOTICE:
The radio only supports the following characters to compose file names:
1 numeric digits
2 English alphabetic characters
3 space
4 non-alphabetic characters: ! # $ % & ' ( ) - @ ^ _ ` { } ~.
Before using non-alphabetic characters from point 4, make sure your computer system supports
them.
To achieve the best radio performance, use microSD cards with the minimum write speed of at
least 6 MB/s (Class 6 or higher). Cards with the write speed lower than 6 MB/s slow down the
performance of the radio.
2.2.4
Installing the MicroSD Card
IMPORTANT: The following procedure must be performed only in non-hazardous environment.
Prerequisites:
Your radio is equipped with a SIM/microSD card slot.
Prepare T-5IP TORX – PLUS screw bit and 1.0 ±0.1 in-lbs torque screwdriver.
Procedure:
1 Remove the battery.
2 Remove the SIM card door (see Installing the SIM Card
on page 24).
3 Slide the SIM card holder toward the dust cover side of the radio (as indicated by the UNLOCK
arrow) to unlock it and lift it up.
MN002041A01–AA
Chapter 2: Getting Started
Send Feedback 29
To Next Page
Loading...
