EasyManua.ls Logo

Motorola MTP8000Ex Series - Powering on the Radio; PIN Code Authentication; Unblocking Your Radio; Unlocking Your Radio

Motorola MTP8000Ex Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.6
Powering On the Radio
Procedure:
Press and hold
ON button.
Your radio performs a self-check and registration routine.
After successful registration, your radio is in service.
NOTICE: Your radio powers on without visible and audible notification if Covert Mode is
activated.
2.7
PIN Code Authentication
If pre-set by your service provider, the radio has active PIN Code Authentication, which helps you
increase security and protect your radio against unauthorized use. The PIN code is read from the SIM
card or radio programming and cannot be changed or disabled. If you are unable to unlock the radio,
you cannot send or receive any call, nor adjust the volume level with the
ROTARY KNOB.
You are asked to enter the PIN code each time you turn on the radio.
2.7.1
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
NOTICE: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
2.8
Unlocking Your Radio
Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt.
Your radio enters the default home display.
NOTICE: The unlock code is originally set to 0000. Your service provider may change this
number before you receive your radio.
2.9
Locking/Unlocking the Keys/Buttons
Press MENU key and *Left NAVIGATION key.
NOTICE: The EMERGENCY
button is not locked. Entering Emergency Mode unlocks all keys.
MN002041A01–AA
Chapter
2: Getting Started
Send Feedback 45

Table of Contents

Related product manuals