Motorola MTP8000Ex Series - Setting Volume Adjustment Mode; Tones; Keypad Tone; All Tones

NOTICE: When volume control capable Bluetooth device is connected, the radio always uses
the Common setting.
5.10.5.8
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Audio → Volume Adj. Mode.
3 Select one of the following:
• Individual — You can set Duplex, Simplex, Earpiece, Speaker and Keypad per your
preferences in
MENU → Setup → Set Volume.
• Common — You can set one value for all the items in MENU → Setup → Set Volume.
5.10.6
Tones
This field sets the volume level for the tones set.
NOTICE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
5.10.6.1
Keypad Tone
You can activate/deactivate keypad tone at every key press.
Your service provider can also toggle this feature on and off.
5.10.6.1.1
Setting Keypad Tone
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
• On — Activates keypad tone.
• Off — Deactivate keypad tone.
5.10.6.2
All Tones
You can activate/deactivate all tones.
5.10.6.3
Setting All Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup
→ Tones → All Tones.
MN002041A01–AA
Chapter
5: Main Menu
Send Feedback 117