EasyManua.ls Logo

Motorola MTP8000Ex Series - 3.5 Emergency Operations

Motorola MTP8000Ex Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.4.11
Selecting DMO Group Call Options
When and where to use: Helps to communicate with other radio users on the same talkgroup through
the Gateway or Repeater.
Procedure:
1 From the home screen, press Optns.
2 Press Config.
3 Select one of the following:
MS - MS
— Your radio can communicate only with other radios within its range.
Gateway — Your radio uses a gateway to communicate with the infrastructure.
Automatic — Your radio uses the first available gateway for that talkgroup.
Specific — Your radio uses only the Gateway with the specified Gateway address for that
talkgroup. If your radio displays Selected Gateway:None, press Edit to enter the current
gateway address.
Repeater — Uses the first available repeater for that talkgroup.
GW + Rep — Uses the first available gateway or repeater for that talkgroup.
Automatic — Uses the first available gateway for that talkgroup.
Specific — Uses only the Gateway with the specified Gateway address for that talkgroup.
If your radio displays Selected Gateway:None, press Edit to enter the current Gateway
address.
NOTICE: When the Gateway and the Repeater cannot be communicated even
though a talkgroup to use them is configured, the radio attempts the direct MS-MS
communication.
When your radio detects the appropriate Gateway and/or the Repeater, the Gateway and/or Repeater
icons turns solid, respectively.
3.5
Emergency Operations
Emergency Operations are used in critical situations.
Pressing and holding the
EMERGENCY button, or entering the Emergency Number and pressing the
SEND key, activates one or more services (depending on your service provider settings):
Emergency Alarm
SDS Status
Silent Emergency
Hot Microphone operation
Emergency Individual Call (Private or MS-ISDN)
GNSS location information (can be activated when the EMERGENCY button is pressed even if GNSS
is switched off)
NOTICE: It is possible to turn on the radio by pressing the
EMERGENCY button. Depending on
the service provider settings, the radio can start Emergency Operations automatically. If the
radio is PIN-protected (except for SIM PIN), Emergency Operations will bypass the PIN lock for
the duration of the Emergency Operations.
MN002041A01–AA
Chapter
3: Modes
68 Send Feedback

Table of Contents

Related product manuals