• # (number) — each contacts entry must contain a number.
• Speed # — accept the default Speed Dial number or change it.
5.4.1
Creating Contacts
Procedure:
1 From the home screen, select Contcs.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press Ok.
4 Highlight Type and press Change. Select the required type of your contact.
NOTICE: You can use the left and right NAVIGATION keys to select the type of your contact
from the Contact Details screen.
5 Highlight #
(number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1– 1000) of your
contact and press Ok.
NOTICE: If the entered number exist, the radio displays Overwrite? message. Press
Yes to confirm, or No to enter the speed dial number again.
7 Press Done.
You have create a contact with one number. To add additional number repeat steps 4–6.
5.4.2
Editing Contacts
Procedure:
1 From the home screen, press Contcs.
2 Highlight the contact you want to edit.
3 Press the MENU key.
4 Press Edit.
5 Highlight one of the following entries and press Change to edit:
• Name
• Type
• # (number)
• Speed #
6 Press Done.
5.4.3
Deleting Numbers
Procedure:
1 From the home screen, press Contcs.
2 Select a contact you want to edit.
3 Use left or right NAVIGATION keys to choose the required number.
MN002041A01–AA
Chapter
5: Main Menu
94 Send Feedback
To Next Page
Loading...
