3 Highlight the required file and press the
MENU key.The maximum recommended file size is 2 GB.
4 Select Forward.
5 Perform one of the following actions:
If… Then…
If the paired devices list is empty, wait until the radio displays the list and then high-
light the device and press Connect.
If the required recipient device is
present on the paired devices list,
highlight the device and press Select.
If the required recipient device is
not present on the paired devices
list,
perform the following actions:
a Refresh the list by selecting Search.
b Highlight the device and press Connect.
The sending radio displays the upload icon while sending.
NOTICE: You can send any file type stored in My Received Files. However, the radio displays
only JPEG files. To view other types of files, use a computer interface. To do so, connect the
radio to a computer in the USB Mass Storage Mode. For more information, see USB Settings
on page
128.
5.6.7.3
Viewing Received Files
This procedure describes how to view files received via Bluetooth.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Bluetooth → My Received Files.
A list of all files received appears.
NOTICE: If you want to view only the JPEG images, use the Picture Browser.
3 Highlight the required file and press Open.
5.6.7.4
Managing Received Files
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Bluetooth → My Received Files.
A list of all files received appears.
3 Press the
MENU key.
4 Select one of the following:
• Details – displays details of the file: name, size, reception date and time.
• Forward – sends the selected file to another Bluetooth-enabled device. To send the file,
highlight the recipient device and press Select.
• Delete – deletes the selected file.
MN002041A01–AA
Chapter
5: Main Menu
104 Send Feedback
To Next Page
Loading...
