3.4.7.1
Enabling Network Monitor
Prerequisites: Ensure your service provider enabled the Network Monitor feature.
Procedure:
From the home screen, select Optns → Network Monitor.
3.4.8
Communication through Repeaters
Radios that are out of range and cannot communicate directly one with another in DMO Mode can do it
through the repeater. The repeater is a radio that repeats all communication on a chosen channel, and
as a result increases radios’ DMO range.
When the radio connects to a repeater, it plays a tone, displays the Repeater available message, and
shows an appropriate icon. When the radio looses connection with the repeater, it plays a tone,
displays the Repeater not available message, and the repeater icon is blinking.
MN002041A01–AA
Chapter 3: Modes
66 Send Feedback
To Next Page
Loading...
