• Range alias
•
Talkgroup alias
• Home mode display
• Time and date
• RMS/FMS
• ISSI
• Audio profile name
• Gateway Background Mode (with one of the reasons for entering the mode):
- Configuration
- TMO Failure
- Gateway Detected
- Repeater Call
- DMO Call
- Unknown
Order and visibility of these items are also subject of the Configurable Idle Screen settings.
2.5
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain
features.
Depending on your service provider settings, status icons can appear in normal or large size. By
default, they are large on the home screen and normal when browsing though the radio menu.
Table 8: Status Icons
Icon Description
Trunked Mode Operation
or
In Service
or
No Service
or
Signal Strength – The more bars, the stronger the signal.
or
RF Power – Indicates the High RF Power is enabled. Shows the signal strength.
The more bars, the stronger the signal.
Migration – Displayed when your radio is registered to the foreign network.
Broadcast Call – Displayed when the radio is in the Broadcast Call.
Scan – Indicates talkgroup scanning is activated in the radio.
Packet Data / Multi-Slot Packet Data (MSPD) – The more blue sections on the
icon, the faster the data transfer. Possible three states:
Table continued…
MN002041A01–AA
Chapter 2: Getting Started
40 Send Feedback
To Next Page
Loading...
