EasyManua.ls Logo

Motorola MTP8000Ex Series - Page 41

Motorola MTP8000Ex Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Icon Description
Four gray sections: context activated – data idle
One blue (from the left): Packet Data active
Two blue (from the left): Multi Slot Packet Data active
Direct Mode Operation
Direct Mode Call – Displayed when the radio is receiving a Direct Mode call.
The more bars, the stronger the signal.
or
High RF Power: receiving – Displayed when the High RF Power option is ena-
bled and the radio is receiving a call.
Direct Mode – Displayed when the radio is in Direct Mode (radio-to-radio com-
munication).
Repeater Mode – Displayed when the radio is switched to work as a repeater in
Repeater Mode.
DMO Gateway Communication Mode – Indicates that gateway is selected. The
icon has the following states:
Solid – while the radio is synchronized with the gateway.
Blinking – while the radio is not synchronized or during attachment.
No icon – during a radio to radio and repeater call.
DMO Repeater Communication Mode – Displayed when the Repeater or GW +
Rep option in DMO Mode is selected. This icon has the following states:
Solid – while the radio has detected the repeater (for example when the ra-
dio receives a presence signal).
Blinking – while the radio has not detected the repeater or during attach-
ment.
No icon – during a radio to radio and gateway call.
General Icons
All Tones Off and Duplex and Simplex Ring Muted – Indicates that all alert
tones are off and both duplex an simplex ring volume is set to 0.
All Tones Off – Indicates that:
Volume is set to 0 (when Volume Adj. Mode is set to Common).
Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is
set to Individual).
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex
ring volume is set to more than 0.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex
ring volume is set to more than 0.
Low Audio – Indicates that the audio mode is changed to low.
High Audio – Indicates that the audio mode is changed to high.
Earpiece Connected – Indicates that the earpiece is connected.
Table continued…
MN002041A01–AA
Chapter 2: Getting Started
Send Feedback 41

Table of Contents

Related product manuals