• Off — To deactivate this feature.
5.10.8
Time and Date
This sub-menu controls the displayed time and date on the home screen.
NOTICE: If the Home Display Text Message feature is enabled, Home Mode Display Text may
cover time and date, depending on the Configurable Idle Screen settings.
NOTICE: Infrastructure synchronizes the time and date. When not within the infrastructure
signal range you can set the values manually.
5.10.8.1
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Display.
3 Select one of the following:
• Time & Date
— Your radio displays time and date.
• Time Only — Your radio displays time only. Format Date sub-menu is disabled.
• Date Only — Your radio displays date only. Format Time sub-menu is disabled.
• Off — Your radio does not display time nor date. Format menu is disabled.
5.10.8.2
Setting the Time Format
Prerequisites: If MENU → Setup → Time & Date → Display is set to Time & Date or Time Only.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
• 12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
• 24-Hour.
5.10.8.3
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using NAVIGATION keys or keypad.
4 Press Done.
MN002041A01–AA
Chapter 5: Main Menu
122 Send Feedback
To Next Page
Loading...
