NOTICE: If a multi-unit charger LED indicates an error (blinking red light) when radio is
inserted and being charged with the multi-unit charger (MUC), re-insert the radio. If the
light is still red after several reconnections to MUC, the battery may be damaged or
depleted.
Postrequisites: The battery may heat up during charging. After charging, make sure that the battery
and the radio are within the operating temperature range before using the radio.
2.2.8
Charging Indicators
When your radio is turned on while charging, it displays an icon of the battery in charging.
When the radio is turned on while charging, an appropriate Battery Charge Progress icon is displayed
in the status icon area.
When the radio is turned off while charging, a Charger Mode screen is shown on the display. The
screen contains an appropriate Battery Charge Progress icon and charging progress expressed in
percentage.
Figure 3: Charger Mode Screen
When your radio is turned off while charging, it remains turned off while the battery is being charged.
Table 3: Battery Icons
Battery Capacity
0%–5% 5%–15% 15%–25% 25%–40% 40%–60% 60%–80%
80%–
100%
Battery Charge Progress
0%–5% 5%–15% 15%–25% 25%–40% 40%–60% 60%–80%
80%–
100%
Table 4: LED Indicators
Indication Status
Solid green Battery fully charged
Table continued…
MN002041A01–AA
Chapter 2: Getting Started
34 Send Feedback
To Next Page
Loading...
