Chapter 2
Getting Started
This chapter contains basic information on how to use the radio.
2.1
Product Technical Information
Table 2: Product Technical Information
Description Value
Maximum Voltage 8.0 V
Maximum Current 2.5 A
Maximum RF Power 1.8 W
Maximum Speaker Load 1.3 W at 16 Ω
Antenna Impedance 50 Ω
Operating Temperature Range -20 °C to +55 °C
Storage Temperature Range 20 °C to 30°C
Ingress Protection Rating IP67
Audio Power Through the Radio
and Accessories
RMS: 2 W
Peak Power: 4 W
Operating Time Duty Cycle
05/35/60 12 h
Enhanced Data Transfer Hardware ready for TETRA Enhanced Data Service (TEDS)
NOTICE: 800 MHz models are not hardware ready
for TEDS.
NOTICE: The system (SwMI) determines radio transmit and receive times, which affect the
actual radio operating time.
If the radio overheats (due to high ambient temperature or other factors), thermal protection will
reduce transmitter power, which may lead to loss of communication.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
2.2
Before Power On
Read this section before you power on your radio for the first time.
MN002041A01–AA
Getting Started
Send Feedback 23
To Next Page
Loading...
