2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
NOTICE: To store a number for a new contact, select [New Contact] and fill out the
required fields. Press Done to save it..
8 Select Edit.
9 Choose the Type of the new number and press Done.
5.3.2.6
Calling Numbers in Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number
that is embedded in the message text.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT
button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the SEND key.
7 Select Ctype to choose the type of call (Private, Phone, or PABX).
8 Press the PTT button or the SEND key.
5.3.2.7
Making Group Calls on theTalkgroup of the Message Sender
Prerequisites: Embedded Number feature is enabled by your service provider.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and press the PTT button.
5.3.2.8
Immediate Message
NOTICE: This is a selling feature.
When the new immediate message is received, radio plays the New Mail Received tone and displays
the content overlapping your previous screen. All immediate messages are stored in the Inbox. If the
radio is in PIN Lock state, immediate message is displayed after correct PIN is entered.
MN002041A01–AA
Chapter 5: Main Menu
Send Feedback 87
To Next Page
Loading...
