12 of 82 MANUAL-75-v2.0
1.4 PPE requirements
WARNING
Use personal protective equipment (PPE) as required. Do not eat, drink or
smoke when using the unit. Ensure adequate ventilation at all times.
Moxion Power recommends using high voltage gloves class 00 for operators
who have been trained in NFPA70E.
Consider the following when using PPE:
l
Eye and face protection: Wear safety glasses that meet ANSI Z87.1
requirements. Follow local on-site health and safety guidelines.
l
Safety shoes: Wear safety shoes that meet ASTM F2413 requirements.
l
Trapped hair or loose clothing: Use caution to prevent hair from being caught
by any moving parts. Secure all loose clothing.
1.5 Safe operating area and clearance
When operating the unit you should allow at least 3 feet (0.9 m) around the unit. This is
to provide adequate ventilation and access to the connection panels.
Caution
Do not position any high-temperature devices or exhausts, for example
diesel generators or air handlers, closer than 12feet (3.7 m) to the unit.
The air intake vents on the unit must not be blocked during unit operation.
To prevent the unit from rolling backward or forward, secure the unit in place
with wheel chocks.
If space is limited around the unit's operating area, make sure there is enough space to
allow the unit to be positioned for hitching to a towing vehicle.
MP75-600 - User Manual 1 Safety information