MANUAL-75-v2.0 19 of 82
1 Safety information MP75-600 - User Manual
Towing and transportation safety
You can transport the unit between locations by towing it or loading onto a flat-bed or
goose-neck trailer.
► For more information, see
Towing the unit
on page 49.
1.8
For more information about preventing thermal runaway, contact Moxion
Power.
Call 1-833-669-4661 or customersupport@moxionpower.com.
WARNING
Risk of serious injury or death!
l
Before transporting the unit, make sure to secure the unit's trailer to
the towing vehicle by using appropriate connections.
l
Always use safety chains in addition to the standard pintle hitch and
lunette ring connection.
l
Make sure the trailer and the towing vehicle are in good operating
condition.
l
When transporting the unit, abide by local road safety regulations.
WARNING
Risk of serious injury or death!
Do not lift the unit using the trailer D-rings located on the side of trailer.
These D-rings are only to be used for securing the trailer, with the MPU
fitted, when it is transported using a flat-bed or goose-neck trailer.
Caution
Risk of injury or damage!
Do not use the tongue jack for supporting the unit when transporting the unit
on a flat-bed or goose-neck trailer.
When transporting the unit on a flat-bed or goose-neck trailer, make sure
you have fitted the supplemental jack stand.
Caution
Risk of injury or damage!
Do not use the tongue jack for supporting the unit when transporting the unit
on a flat-bed or goose-neck trailer.
When transporting the unit on a flat-bed or goose-neck trailer, make sure
you have fitted the supplemental jack stand.
To Next Page
Loading...