32 of 82 MANUAL-75-v2.0
Figure 13 - Charging port location
2.4 E-stop
The e-stop is located on the side of the unit.
WARNING
Risk of electrical shock!
The e-stop does not isolate the high-voltage systems inside the unit.
If any maintenance is required, the internal systems need to be isolated.
Notice
When the e-stop is used only the AC output of the MPU is disabled. The e-
stop, when used, also stops the charging process and clears faults.
Engaging the e-stop button stops all power output from the unit.
Figure 14 - Location of the e-stop
MP75-600 - User Manual 2 Hardware description
To Next Page
Loading...