Bolt X Quick Start Guide
75
Power Data by Country - USA
*YRC1000 3-Phase, 380-480VAC (-10%, +15%), 50/60Hz, (±2%) (Regen
Protection Unit requires 400/415V only)
Notes
1. Bolt X on Pedestal does not need a neutral.
2. If needed the Bolt X on Pedestal requires a transformer to bring
the voltage into the operating range 380-480V 3-Phase.
3. Bolt X on Track will require a transformer to bring the voltage
into the operating range of 400/415V for correct operation of
the Regen Protection Unit and to provide a balanced neutral.
To Next Page
Loading...