MULTILIFT XR S - Page 133

XR21S59 CHU 133
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
M
A
M
M
UNLOADING A HEAVY CONTAINER IN MANUAL MODE A5
1. Choose manual mode A5, push the A5 button for approx. 2 s.
- green signal light ”power on” is lit on the stowage control unit.
2. Open the body locks
- push the ”bodylocks open” button
- “locks not closed” signal light on the control unit is lit, when the locks are fully
open.
Changing to automatic mode A3
4. Select automatic mode A3
- push the A3 button approx 2 s.
- “power on” signal light on the stowage control unit goes out.
 Whenthecontrolleverismovedback,rsttheXR21Sequipmentmovesthe
horizontal movement backwards and the middle frame moves back, just as
depicted in section Unloading a atrack/body describing automatic mode A1.
3. Drive the middle frame to an approx. 20 degree angle
3.1 - move the control lever back (main cylinders out)
- ”frame not down” signal light is lit when the middle frame is lifted o󰀨 the sub
frame
3.2 - stop the movement by releasing the control lever.
If the ISO container has a heavy load (more than 10 t) or its oor is extended, the beginning
of unloading should be done according to the following sections in manual mode A5.