XR21S59 CHU 35
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
A
M
CXXX / dXXX
>>>>>>>>>
Loading a atrack/body
XR21S EQUIPMENT IS IN TRANSPORT POSITION WHEN STARTING MOVEMENTS
During atrack/body change the horizontal movement is in atrack home position (approx.
350 mm behind the stow/unstow position).
The recommended pump running speed is between 1000 - 1400 k/min. Let the engine run
at idle speed at the beginning and end of movements and when using the locks.
NOTE! Unnecessary use of the main pressure relief valve should
be avoided, because this may overheat the oil.
1. See the safety instructions before loading.
2. Reverse the truck carefully close to the atrack/body.
Stop it about 5 meters from the atrack/body gripping bar.
3. Engage the parking brake.
4. Engage the hydraulic pump.
Safety codes
5 Choose manual mode A5
- push the A5 button for approx. 2 s.
5 Choose automatic mode A1
- push the A1 button for approx. 2 s.
MANUAL MODE A5AUTOMATIC MODE A1
To Next Page
Loading...